Description
Avantone CK-7 Large Capsule Multi-Pattern FET Condenser Microphone
The Avantone « Cabernet (C-series) » mics are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The Avantone CK-7 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics…but at a fraction of their cost!
Our rugged CK-7 microphone body and capsule assembly are precision machined of brass. Aesthetically, it features an elegant Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly. The transformer coupled Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs.
The CK-7 houses a 35mm gold-sputtered thin Mylar capsule. The CK-7 in its normal stock version uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents our commitment to quality as these normally are the type of « upgrade » components that are implemented by microphone modders/hot-rodders! Any studio can proudly offer the CK-7 as a vocal mic or utility condenser due to its versatility…It exudes class visually as well as sonically.
Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The versatile CK-7 mic is able to produce professional results with a clean sonic character. The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results. The 3 patterns allow the CK-7 to be used in a variety of situations.
The cardioid pattern is generally best used on vocals and single instruments. The omni mode works well in incorporating some room sound into the track. The figure 8 pattern allows 2 vocalists to use the mic at the same time from opposite sides. The CK-7 has separate -10 dB pad & 80 Hz LF roll off switches….The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from « muddying up » the track.
Features
Uses Include:
Studio vocals, acoustic guitar, mandolin, drum overheads, piano, room mic, etc…
Standard Items Supplied:
- Avantone CK-7 Multi-Pattern FET Microphone
- Avantone Custom Retro Shockmount
- Elegant padded genuine wooden Mic box
- Padded Aluminum storage / travel case
- Owners Manual
Specifications
Type
True Condenser
Polar Pattern(s)
Cardioid , Omni , Figure 8
Capsule
Dual-sided 35mm center-terminated gold-sputter Mylar (6 micron)
Frequency Response
20-20,000 Hz +/- 3dB
Output Impedance
<=250 Ohms
Maximum SPL
139dB (0.5% THD @1000Hz)
Sensitivity
-38 dB (0 dB=1V/Pa)
Equivalent Noise Level
(A-Weighted per IEC 286-4) < 16 dB
Output Connector
Male XLR 3-pin
High-Pass Switch
80 Hz 6dB/octave
Attenuation Switch
-10 dB
Power Requirement
Standard 48 Volt Phantom / 5mA
Included Accessories
-Shockmount
-Wooden Box in Metal Carrying Case
Dimensions
187mm x 51mm / 7.5″ x 2″
Weight
.65 kgs / 1.4 lbs
Finish
Polished Nickel trim / Metallic Cabernet Red Body
Avis
Il n’y a pas encore d’avis.